Cartridge Filters

How do I remove and reinstall my cartridge filters?

  1. Turn the pump off
  2. Open the bleed valve on top of the filter (you’ll hear the water rush out of it)
  3. Take the band off
  4. Take the top off
  5. Pull the filters out for cleaning or replacing

To re-install, the steps are exactly the same but in reverse:

  1. Leave the bleed valve in ‘open’ position
  2. Insert cartridge
  3. Put top on
  4. Put band on
  5. Turn the pump on – when the water starts squirting out the top then shut the bleed valve off